Advertisement
1.
Connect Three Glide Rails using Connector
Brackets making sure that the bolt holes line
up on the Glide Rails & Connector Brackets.
3.
The connector bracket at the ends of the rails
will only need one bolt. The completed rail
should have three Glide Rails connected.
This will make a 21ft long Glide Rail. Repeat
this process for the other Glide Rail.
5.
Insert the Rollers into one end of the Hose
Glide.
2.
Insert bolts to connect Rails & Brackets.
Tighten bolts securely
4.
Hold the Glide Rail in place where it will be
installed. Mark the holes for the mounting
brackets. Drill or punch holes in your booth
wall and mount the Glide Rail using the
suppled nuts & bolts. Be sure to caulk
around the bolts to prevent unwanted air-
flow into booth.
6.
Install Connector Bracket End Caps on end
of Glide Rails.
Advertisement
