High voltage power supply with bipolar output (11 pages)
Summary of Contents for OEM PBZ-300
Page 1
1.06 / 2021 08 11 PBZ-300 / PBZ-500 capacitor charging power supplies User manual Warning! This equipment may be dangerous. Please read the entire user manual carefully before using the product. Important note. Module is sensitive to the reverse polarity applied to the output.
Page 2
DC input to the regulated high voltage DC output to charge capacitors. Input voltage is 24V DC for PBZ-300 and 48V DC for PBZ-500. The maximum output voltage level (V ) could be chosen from 300V to 4000V at the moment of order. Higher output voltages are available upon request.
Page 3
Connectors, pins, interface signals INTERFACE: 13 pin mixed D-SUB connector of 13W3 type 24V DC (48V DC) power and all the control signals are to be connected here. PIN (color) DESIGNATION DESCRIPTION Module can be protectively grounded via A1 (yellow/green) this pin A2 (red) 24V DC (48V DC)
HV OUTPUT: 2-pin or 3-pin proprietary connector by OEM Tech By default PBZ-300 (PBZ-500) is supplied with positive output polarity (P). Negative output (N), floating output (F) and bipolar output (B) are available on request. Pin layouts in dependence on modification are given in the table below:...
Page 5
• Do not self-repair the power supply, there are no user-serviceable parts inside Operations 1 Ensure 24V DC (48V DC) power supply is off 2 Connect PBZ-300 (PBZ-500) to the load and to 24V DC (48V DC) power supply. Do not apply DC power until the setup is completely assembled...
Page 6
Specifications ELECTRICAL PBZ-300 PBZ-500 Input Input voltage (DC) 24 V 48 V Input current <20 A <18 A HV Output Positive by default (negative polarity, floating Output polarity and bipolar outputs are available on request) 300V, 500V, 700V, 1000V, 2000V, 4000V...
Page 8
Z means output polarity – P for positive, N for negative, F for floating output, B for bipolar output (three leads output). By default modifications with positive output are supplied Examples: Description PBZ-300-500V-PD-P Embedded version, 24V DC input Maximum output voltage 500V Partial discharge modification Maximum output power 400W...
Page 10
Bench-top version Bench-top version of PBZ-300 with 100-240VAC input is also available. Bench-top version of PBZ-500 with 100-240VAC input is available on request.