Mounting The Solar-Divicon - Viessmann VITOCELL 140-E Installation And Service Instructions Manual
Solar buffer cylinder
Hide thumbs
Also See for VITOCELL 140-E:
Table of Contents
Advertisement
Vitocell with fitted Solar-Divicon
4.
2.
1.
Fig. 16
1. Push the corrugated hose into the elbow fitting.
2. Screw the air vent plug into the elbow fitting.
3. Push the corrugated hose into the solar flow and
secure the elbow and flat gasket to the cylinder.
Mounting the Solar-Divicon
Solar-Divicon installation instructions
(cont.)
3.
5.
4. Fit the solar flow pipe.
5. Fit the solar return pipe.
!
Please note
Wiring can be damaged if it comes into contact
with hot components.
Ensure adequate thermal insulation between
cables and hot pipework.
Installation sequence
19
Advertisement
Table of Contents
