Fitting The Cover; Installing An Air Vent Valve On The Solar Side - Viessmann VITOCELL 140-E Installation And Service Instructions Manual

Vitocell without fitted Solar-Divicon

Fitting the cover

1.
A
2.
Fig. 11
Viessmann logo
A

Installing an air vent valve on the solar side

2.
1.
Fig. 12
1. Push the corrugated hose into the elbow fitting.
2. Screw the air vent plug into the elbow fitting.
3. Push the corrugated hose into the solar flow and
secure the elbow and flat gasket to the cylinder.
(cont.)
3.
Route the drip hose of the air vent valve into a vessel.
Continue on page 27.
Installation sequence
15