Advertisement
Installation in a sliding sash window (cont.)
(B) If the inner height of the window is between 609mm and
934mm inclusive:
• Open the window sash and place the window panel
on the window frame.
• Slide the adjustment panel to fit the window frame
height.
• Secure the window panel to the window frame with 3
screws.
Adjustment
panel
Extension panel
(C) If the inner height of the window is between 934mm and
Adjustment
1219mm inclusive:
panel
• Attach the extension panel to the adjustment panel.
• Open the window sash and place the window panel
on the window frame.
• Slide the adjustment and extension panels to fit the
window frame height.
• Secure the window panel to the window frame with 4
screws.
Extension panel
Foam seal B
(adhesive type)
Foam seal B
(adhesive type)
Foam seal A
(adhesive type)
Foam seal A
(adhesive type)
electrolux EPV09CRA & EPV12CRA installation of window kit 9
Extension panel
Foam seal B
(adhesive type)
Foam seal B
(adhesive type)
609mm - 934mm
Foam seal A
(adhesive type)
Foam seal A
(adhesive type)
609mm - 934mm
934mm - 1219mm
Foam seal
934mm - 1219mm
Foam seal
Extension panel
934mm - 1219mm
6. Cut the foam seals A and B (adhesive type) to the proper
length and attach them to the window panel
• Attach foam seal A to the window panel and extension
panel, and attach foam seal B to the adjustment panel.
934mm - 1219mm
Foam seal B
(adhesive type)
Foam seal B
(adhesive type)
Foam seal A
(adhesive type)
7. Close the window sash securely against the window
panel
Foam seal A
(adhesive type)
8. Cut the foam seal to an appropriate length and seal the
opening between the side of the inner window sash and
the outer window sash
Foam seal
Foam seal
9. Attach a bracket with the screw
Bracket
Bracket
934mm - 1219mm
934mm - 1219mm
Bracket
Bracket
Advertisement
