Advertisement
8 installation of window kit electrolux EPV09CRA & EPV12CRA
Installation in a sliding sash window
1. Connect the rain guards to the insect guard net
• Insert all three projections on each rain guard into the
holes in the insect guard net.
• Side "A" will now be uppermost, as indicated in the
diagram.
Insect guard net
Hole
Insect guard net
Projection
Hole
Projection
2. Attach the bushing into the hole of the window panel
• The bushing can be used as a point to run the drain
hose for external drainage.
Insect guard net
Hole
Projection
3. Attach the guard combined with insect guard net to the
window panel
• Push the insect guard net firmly to ensure that its four
projections fit into the holes in the window panel.
Projection
• Side "A" will now be at the top, as indicated in the
diagram, when it is installed in the window.
Projection
Projection
Exhaust cover
Window
panel
Exhaust cover
Window
panel
Adjustment panel
Window
Adjustment panel
panel
Window
Window
panel
panel
"A"
"A"
Rain guard
"A"
Rain guard
Window
panel
Window
Rain guard
Bushing
panel
Bushing
Window
Window
panel
panel
Bushing
Window
panel
"A"
"A"
Window
panel
Foam seal A
(adhesive type)
"A"
Foam seal A
(adhesive type)
Foam seal A
(adhesive type)
Cut
Cut
Exhaust cover
559mm - 609mm
Cut
Projection
Projection
4. Cut the foam seal A (adhesive type) to the proper length
and attach it to the window frame
Projection
5. Install the window panel into the window frame
Exhaust cover
(A) If the inner height of the window is between 559mm and
Window
609mm inclusive:
panel
T he window panel cannot be installed in windows less
than 559mm high, as you will be unable to shut the
exhaust cover.
Adjustment panel
I n such cases the exhaust cover will have to be removed
prior to installing the window panel.
• Remove the adjustment panel from the window panel,
Window
panel
and cut the window panel to the same height as the
window.
• Open the window sash and place the window panel
on the window frame.
• Secure the window panel to the window frame with
2 screws.
Exhaust cover
Window
panel
Adjustment panel
Window
panel
Window
panel
"A"
Window
panel
Bushing
Foam seal A
(adhesive type)
Window
panel
"A"
Cut
Foam seal A
(adhesive type)
559mm - 609mm
Cut
559mm - 609mm
Advertisement
