Advertisement
6 installation of window kit electrolux EPV09CRA & EPV12CRA
Installation of window kit
Installation in a double-hung sash window
1. Connect the rain guards to the insect guard net.
• Insert all three projections on each rain guard into the
holes in the insect guard net.
• Side "A" will now be uppermost, as indicated in the
diagram.
Insect guard
net
Projection
Insect guard
net
Projection
Insect guard
net
2. Attach the bushing into the hole of the window panel.
• This bushing can be used as a point to run the drain
hose for external drainage.
Projection
Bushing
Bushing
Projection
"A"
Bushing
Projection
3. Attach the guard combined above to the window panel
• Push the insect guard net firmly to ensure that its four
projections fit into the holes in the window panel.
• Side "A" will now be at the top, as indicated in the
"A"
diagram.
Projection
"A"
Exhaust cover
Window
panel
Exhaust cover
Adjustment panel
Window
panel
Adjustment panel
Exhaust cover
Window
panel
559mm - 609mm
Hole
Rain guard
Hole
"A"
Rain guard
"A"
Hole
Rain guard
Window panel
"A"
Window panel
Window panel
Window panel
Window panel
Window panel
Foam seal A
(adhesive type)
Foam seal A
(adhesive type)
Foam seal A
Cut
(adhesive type)
Cut
Window panel
Cut
Projection
Projection
"A"
4. Cut the foam seal A (adhesive type) to the proper length
and attach it to the window sill
Bushing
Projection
"A"
5. Attach the window panel to the window sill
Exhaust cover
(A) If the inner width of the window is between 559mm and
Window
609mm inclusive:
panel
T he window panel cannot be installed in windows less
than 559mm wide, as you will be unable to shut the
exhaust cover.
Adjustment panel
In such cases the exhaust cover will have to be removed
prior to installing the window panel.
• Remove the adjustment panel from the window panel,
and cut the window panel to the same width as the
window
• Open the window sash and place the window panel
on the window sill
• Secure the window panel to the window stool with 2
559mm - 609mm
screws
Window
panel
Adjustment panel
559mm - 609mm
"A"
Window panel
Window panel
Foam seal A
(adhesive type)
Window panel
Cut
Foam seal A
(adhesive type)
Window panel
Window sill
Exhaust cover
Cut
Window panel
Window sill
Advertisement
