GB
The lid keys should be consigned to the person responsible for ordinary maintenance
and cleaning. If necessary, the tank can be washed in a dish-washer or rinsed out under
running water, while the tank compartment can be cleaned using a dry cloth wrapped
round the cleaning-rod for the surfaces and using only the type B cleaning-rod for less
accessible parts.
To clean the float pull the upper part till it comes off: it is only fitted on (fig. 14).
Then clean the interior using the type B cleaning-rod (fig. 15).
Finally, rinse using lukewarm water.
When reassembling the float the positions indicated in figures 16 and 17 should be
respected.
We recommend replacing cleaning-rods after they have been used
for approximately one year, or when they have visibly deteriorated.
Fig. 14
Fig. 16
In addition, after cleaning the appliance always
remember to recover the white pod.
CAUTION
12
Fig. 15
Fig. 17