Sony MHC-EX66 Operating Instructions Manual page 28

NO DISC
There is no disc in the player, or you have
loaded a disc that cannot be played.
NO MEMORY
The memory selected for playback or
transfer has no memory media inserted in
the USB device.
NO STEP
All of the programmed tracks have been
erased.
NO SUPPORT
An unsupported USB device is connected.
NO TRACK
Playable file on the USB device is not
loaded in the system.
NOT USED
You tried to perform a specific operation
under conditions where that operation is
prohibited.
NoDEVICE
No USB device is connected or the
connected USB device has been stopped.
OVER
You have reached the end of the disc
while pressing M during playback or
pause.
OVER CURRENT
An over current from the
was detected.
PROTECT
See "If "PROTECT" appears on the
display" (page 22) to check what to do if
this message appears.
PROTECTED
You tried to perform transferring or erase
operation against a write-protected USB
device.
28 GB
PUSH SELECT
You tried to set the clock or timer during
timer operation.
PUSH STOP
• You have pressed PLAY MODE
• You have pressed the buttons whose
READING
• The system is reading information of
• The system is recognizing the USB
REC ERROR
Transferring did not start, stopped
partway, or otherwise could not be
performed (page 24).
REMOVED
The USB device has been removed.
SET CLOCK
You tried to select the timer when the
clock is not set.
SET TIMER
You tried to select the timer when the Play
Timer is not set.
TIME NG
(USB) port
The Play Timer start and end times are set
to the same time.
TRACK FULL
The number of files on the USB device
has reached its maximum.
during playback.
operation is only possible when
playback is stopped.
the disc. Some buttons are not
available.
device.