Epson CaptureOne
MICR specifications
Magnetic character types
E13B, CMC7
Electronic endorsement
Can paste recorded image data on the back image of a check.
Reliability
Franking cartridge life
18,000 in Epson standard print pattern
Scanner life span 1 million sheets
MTBF:
180,000 hours
MCBF:
2,470,000 cycles
Electrical Characteristics
Power supply
Adapter C supplied with CaptureOne
Supply voltage
24 V ± 10%
Current consumption
Operation
Standby
Safety
EMI
FCC/ICES-003 Class A
Safety standards
UL60950-1/
CSA C22.2 No. 60950-1
(Tested using the Epson Adapter C.)
Environmental Conditions
Temperature
Operating
Storage
Packed
Humidity (no condensation)
Operating
Storage
2 - Epson CaptureOne
1.0 A, approximate
0.2 A, approximate
50 to 104° F {10 to 40° C}
–4 to 140° F {–20 to 60° C}
(≤ 120 hours at –4 or 140° F)
20 to 80% RH
5 to 85% RH
DIP Switches
Two fixed DIP switches are located on the main board inside
the bottom cover of the CaptureOne.
SW
Function
1
Internal use. Do not change.
2
Internal use. Do not change.
Lights and Switches
LEDs
POWER
ERROR
DOCUMENT
POWER
On when CaptureOne power is on.
ERROR
Off when CaptureOne is online.
On when scanner is offline (and when scanner cover or
franker cover are open)
Flashes during an error or while waiting for document
removal. (See "Error LED Codes" below.)
DOCUMENT
On when the scanner is ready to process documents in the
ASF or during document processing.
Flashes when the scanner is waiting for document insertion.
Switches
POWER
Turns the CaptureOne on or off.
A power switch cover is available to prevent accidental turn
off. If installed and a failure occurs, unplug scanner
immediately.
Loading Checks
1. Fully extend the pocket guide. Extend the ASF guide fully,
if needed. See the illustration below.
Pocket guide
11/07
ON
OFF
—
Fixed to OFF
Fixed to ON
—
ASF guide