Language Support - Huawei ST5110 User Manual

CCLINUX
USER Manual
Enter new and old passwords as required, then click the "Change" button. Click the "Cancel"
button to exit this interface.

2.5.13 Language Support

1. Introduction:
Use the "Language Support" to configure system native language. It only supports Chinese and
English currently.
2. Operating procedures:
Click "Start" -> "Preferences" -> "Language Support", the running interface is shown in Figure
5-13-1:
Choose the language you want to modify, then click "Apply" button, the system will pop up a
prompt box to ask whether to restart, the running interface is shown in Figure 5-13-2:
Click the "Restart now" button, the system will restart immediately and the language will take
effect after terminal reboot. Click "Restart later", the program is closed, until the next reboot, the
system language will modify.
Issue 1.2 (2018-09-06)
Figure 5-13-1
Figure 5-13-2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
54