Led Status Indicators - Optoma DLP ZU1900 User Manual

ADDITIONAL INFORMATION

LED status indicators

The LED status indicators are located on the rear of the projector. Each LED is defined below.
Message
Standby State
Power on
(Warm up)
Power on &
Laser diode on
Power off
(Cooling down)
AV mute is
off (Image is
displayed)
AV mute is on
(Image is black)
Projector
communication/
operation
Firmware
upgrade
Burnin
Factory Reset
Error
(Over
temperature)
Error
(Fan failure)
Error
(Color Wheel
failure)
Note:
Keypad LED (Power Key) will be in steady red for standby mode.
102 English
Light
Green Orange
Steady
Steady
Steady
Steady
Steady
Steady
Status
Red Green Orange
Flashing
Steady
Flashing
Steady
Steady
Flashing
Flashing Flashing
Steady
Steady
AV Mute
Red Green Orange
Steady
Steady
Steady
Steady
Steady
Steady
Flashing
Flashing