Download Print this page

Advertisement

Dehumidifier
G16-50ESDEHG
Thank you for choosing our product.
For proper operation, please read and keep this manual carefully.
If you have lost the Owner's Manual, please contact the local agent or visit
www.gree.com or sent email to global@gree.com.cn for electronic version.

Advertisement

loading
Need help?

Need help?

Do you have a question about the G16-50ESDEHG and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Gree G16-50ESDEHG

  • Page 1 G16-50ESDEHG Thank you for choosing our product. For proper operation, please read and keep this manual carefully. If you have lost the Owner’s Manual, please contact the local agent or visit www.gree.com or sent email to global@gree.com.cn for electronic version.
  • Page 2: Table Of Contents

    Content Operation Notices Area..................1 Name.....................3 Check Operation.................4 Operation Method...................5 Maintenance Clean and Maintenance................10 shoot ................... Codes................14 Note:...
  • Page 3 Explanation of Symbols Indicates a hazardous situation that, if not avoided, will result in death or serious injury. Indicates a hazardous situation that, if not avoided, could result in death or serious injury. Indicates a hazardous situation that, if not avoided, may result in minor or moderate injury.
  • Page 4: Area

    Operation Area not be used for commercial or industrial applications. enclosed area, such as a closet. temperature will not below 5°C or above 32°C. Allow at least 12-18 inches of air space on all sides of the unit. ffect. Correct Below Above NOTICE:...
  • Page 5 Safety Precautions...
  • Page 6: Name

    Parts Name Front Side Control Panel Air-in grille Cover plate (continous drainge) Water Bucket Castors Back Side Air outlet Rear case Power Plug...
  • Page 7: Check Operation

    Check Before Operation aced. Below are the checking steps: 1. Hold the handles on both sides of the water bucket and pull it out following the arrow direction. moved a little after long-time transportation. If it's not placed properly, move it to the correct position by hand.
  • Page 8: Operation Method

    Operation Method sleeping Bucket full light space indicates bucket lock on high, mid living space mode on needs to be emptied power on indicator and low fan mode on indicator or it is not in the indicator indicator light light indicator light indicator light light...
  • Page 9 Timer On or Timer Off, press these buttons to adjust time. + and - button simultaneously for 3s can lock buttons. If this function is turned on, Button Locked Indicator will be on and display window shows LC, which will blink for 3 times. Then ambient humidity is displayed again.
  • Page 10 MODE Button Press this button to select different kinds of working mode. After each pres- sing of this button, mode will switch among free drying, sleeping space, living space, basement and continuous drying modes, and the corresponding mode indicator will ON. When free drying, all mode indicators are OFF. CONTINUOUS Button When continuous dehumidification mode is selected, the corresponding con- tinuous dehumidify indicator will be on,the dehumidifier will operate continu-...
  • Page 11 Drainage Option Option 1 Emptying Manually NOTICE:...
  • Page 12 Option 2 Gravity Drain Hose 1. Hose is not provided, so user shall prepare it in advance. [Size: The hose thread should have an outer diameter of 11/16 inches (1.0625 inches or 27.0mm), and a pitch of 11.5 TPI.] 2. Remove bucket from the unit as instructed. 3.
  • Page 13: Clean And Maintenance

    Clean and Maintenance WARNING: may lead to electric shock. Otherwise it will damage unit's appearance. 1. Grille and Case To clean the case: When there is dust on the case, use soft towel to dust it off; When the case is very dirty(greasy), use mild detergent to clean it.
  • Page 14 (3) After cleaning, replace the drain lid and handle properly. The side with foam plastic should be Foam beneath the drain lid. Do not remove the foam Plastic Float 3. Air Filter when it has been operating for 250 hours. If it is used in dusty places, clean the air filter more often.
  • Page 15 Troubleshooting Problem Possible Causes Problem Possible Causes Solution...
  • Page 16 Problem Possible Causes Solution Power indicator is not lit when power inserted. is connected. loosen. placed. Empt the b c et and replace B c et has been removed. closed. low.
  • Page 17: Codes

    Malfunction Codes Display Code Malfunction Unit's Possible Causes Name Condition Display Window w h h...
  • Page 18 Display Code Malfunction Unit's Possible Causes Name Condition Display Window Freon-lacking protection The compr- essor stops; the fan mo- High-tempe- tor keeps on rature over running.
  • Page 19 ONE   Y EAR   L IMITED   W ARRANTY     One   y ear   f rom   D ate   o f   P urchase:   •   We   w ill   r eplace   a ny   p roduct   t hat   f ails   i n   m aterials   o r   a bility   t o   f unction   f or   a   p eriod   of  ...
  • Page 20 Marshall Associates International Add: 1131 W. Blackhawk Street 2nd Floor Chicago, IL 60642 Tel: (866) 658-0466 E-mail: gree@maiintl.com www.greeproducts.com...