Table of Contents
Advertisement
F
CONFIGURATION
OVERVIEW
The HeartStart comes with a factory default configuration designed to meet the
needs of most users. This configuration can only be changed by an authorized
person using HeartStart Configure PDA software or Event Review software. This
software is for use by trained personnel. Information about HeartStart data
management products is available online at www.philips.com/eventreview.
DEVICE OPTIONS
The following table includes the features of HeartStart operation that are not
related to patient treatment.
parameter
settings
speaker volume
1, 2, 3, 4,
5, 6, 7, 8
auto send periodic
On, Off
self-test (PST) data
ECG out data
On, Off
default
default description
8
The volume of the HeartStart's speaker is set
to 8, highest.
On
Enables the periodic self-test data to be
broadcast through the device's infrared data
port.
On
Enables the ECG data to be broadcast
through the device's infrared data port.
F
F-1
Advertisement
Table of Contents
