Setting-Up Requirements; Installation Location; Environmental Conditions; Infrastructure - Laird WW 5001 Operation Manual

Product Description

Setting-up Requirements

4.5 Setting-up Requirements

4.5.1 Installation Location

 The location must be even.
 When choosing the installation location the following must be kept in mind:
the air flow of the cooling air for the motor must not be restricted
o
forward and back flow connections must be easily accessable
o
all tubes must be installed without sharp bends
o

4.5.2 Environmental Conditions

CAUTION
Risk of damage due to unsuitable environmental conditions!
Damage to the unit and corrosion damage may result and are not covered by manufacturer's
liability.
 The unit is only authorized for use in indoor environments.
 The unit must not be stored or operated in agressive, humid environments.
 The unit must not be stored or operated outdoor.
Pay attention to the environmental conditions as given in the specifications on page 17.

4.5.3 Infrastructure

The following infrastructure is required for connecting the unit:
Parameter
Operating voltage
Table 8: Required infrastructure
Laird Technologies GmbH
18
Operation Manual
Rated value
230 VAC, 50/60Hz
Date: 28-October-2015
Version: 1.0
Water-Water Cooler WW 5001
1109.00