Table of Contents
Advertisement
Product Description
Unit Components
4.3 Unit Components
The unit consists of the following sub-assemblies .Additional information can be retrieved from the flow
scheme shown in the addendum.
Fig. 6: Main components
1 Coolant container and plate heat exchanger
3 Body
4.3.1 Functional principle
In the cooling circuit the coolant (water or wator/glycol) is driven by the pump to the device that is to be
cooled and back via the return flow. The heat is transferred to the cooling water through a plate heat
exchanger following the principle of opposing flows. The heat is then dumped from the unit by the cooling
water.
The coolant temperature is controlled by an electric thermostat, whereas coolant throughput is controlled by
a flow control device. Both indications are made potential-free and must be integrated into the safety circuit
of the device to be cooled.
Laird Technologies GmbH
16
Operation Manual
3
2
1
2 Cooling circuit
Date: 28-October-2015
Version: 1.0
Water-Water Cooler WW 5001
1109.00
Advertisement
Table of Contents
