Table of Contents
Advertisement
4 Product Description
4.1 Intended Use
The water-water cooler WW 5001 is used for the cooling of a water circuit. As a coolant pure water or a
water/antifreeze mixture may be used. The coolant circulates between the cooling unit and the device to be
cooled. The cooling capacity depends on the temperature and flowrate of the cooling water (tap water). Its
value is 3000 Watts at 5.0 l/min cooling water with 22°C.
The unit is exclusively intended for use in industrial and commercial environments.The intended use also
includes the observance and following of all hints given in this Operation Manual.
4.2 Non-Conformity with the Intended Use
Operation of the unit under improper operational conditions is not allowed, as otherwise the safe operation
can not be assured.
When using the unit in a way not compliant with the intended use, hazardous situations may occur.
Operation of the unit is not allowed under the following conditions:
The unit is used for a purpose other than the one it is intended for.
The unit or parts of it are damaged, the electrical installation is not correct or the insulation is broken.
Protective or safety equipment is not functional or defect, improperly installed or missing.
The unit is not working properly.
The unit has been mofified in any way.
Controlling devices were modified in a way that is not permitted.
Operational parameters were changed in a way that is not permitted.
Operation in areas exposed to explosion hazards
Operation with cooling media not according to specification
Use of unauthorized tools
Exceedance of the compulsary maintenance intervals
PLEASE NOTE
The manufacturer is not liable for damage occuring when using the unit in a way it was not intended for.
When using the unit in a way it was not intended for, the manufacturer's warranty given by LAIRD will
expire.
Laird Technologies GmbH
Operation Manual
Date: 28-October-2015
Version: 1.0
Product Description
Intended Use
Water-Water Cooler WW 5001
1109.00
15
Advertisement
Table of Contents
