Guards; Caution Labels - Laird WW 5001 Operation Manual

3.4.2 Guards

Direct access to hazardous parts or areas of the unit is restricted by the unit cover. The cover may only be
removed for the purpose of maintenance or repair works and shall be replaced prior to taking the unit back
into operation. The unit cover is fixed by four M5 screws.
The electrical terminal area is accessable after removing the back cover. For opening/closing of the
fasteners an AF8 wrench is required.
Guards
Fig. 4:
1 Unit body
3 Removable back cover

3.4.3 Caution Labels

Danger spots on the unit are indicated in correspondence to German safety regulation BGV A8 "Sicherheits-
und Gesundheitsschutzkennzeichnung am Arbeitsplatz".
Caution labels on the unit must be easily readable at all times. Illegible caution labels must be exchanged
immediately.
Fig. 5: Caution labels on the unit
Laird Technologies GmbH
Operation Manual
2
Date: 28-October-2015
Version: 1.0
3
1
2 Access bushing for electric terminal block
Water-Water Cooler WW 5001
Safety Regulations
Safety Equipment
1
13
1109.00