Foppapedretti MYDRIVE Assembly Instructions Manual page 27

• ENGLISH •
USING THE CAR SEAT
IMPORTANT: The straps must be inserted into a
D
respective pairs of slots aligned at the same height.
IMPORTANT: Check that none of the belts are twisted.
Reconnect the chest protector straps together through the
E
hook (D) and thread the belts
of the straps through the metal
belt tension bracket (E).
2.7 REMOVING THE PROTECTIVE CROTCH PADDING AND THE BUCKLE
To remove the crotch strap, adjust the car seat
into the most inclined position (4).
From the seat side, push the strap downwards
through the hole. Locate the locking clip from
the underside and rotate it, passing it through
the slot, while pulling the crotch belt upwards
from the seat side.
2.8 USING THE LOCKING DEVICE
Press down the lever on the red locking device, insert the diagonal belt, and
release it to activate the locking.
O P E N
O P E N
O F F
F ig . 1 F ig . 2
F ig . 1 F ig . 2 F ig . 3
O P E N
O F F
F ig . 1 F ig . 2 F ig . 3
27