Sony VGP-UPR1A Software Manual page 11

Symptom
The images of the extended
desktop do not display.
The image distorts.
Images on the display
connected to the product are
not displayed correctly.
Software is not displayed
correctly.
Cannot play movies on the
display connected to the
product.
With the product connected to
the personal computer, output
from the personal computer to
the display was disabled.
Cannot connect two displays
simultaneously.
Display settings have changed
from the ones I specified.
Cause/Action
If you use the Windows 7 operating system, select multiple displays on

the "Screen Resolution" screen. (To display the "Screen Resolution"
screen, right-click on the desktop and select "Screen Resolution" on the
displayed menu.)
If you use the Windows Vista operating system, the output setting is

set to "Off. " Right-click the
menu. Select "Extended Desktop" from the menu.
Keep any items that generate electromagnetic fields, such as a radio,

away from this product.
Depending on the software being used, images on the display

connected to the product may not be displayed correctly.
Depending on the software you use, images may not be displayed

correctly. Exit the software once, then restart it.
The external display output of this product does not support movie

playback. Movies can be watched on a personal computer display.
Output from the personal computer to the display is available to either

of the following display;
− display connected to the MONITOR connector or DVI-D connector
of the product
− display connected to the external output connector of the personal
computer
Either the MONITOR connector or the DVI-D connector of this

product can be connected. Two external displays cannot be connected
simultaneously.
If the product is not connected to a personal computer and a display is

connected to an external display connector of the personal computer, if
you disconnect the display and reconnect it, display settings such as
extended desktop mode and screen resolution may change and will
need to be set again.
When using a display connected to the product in single display mode,

if the personal computer resumes from sleep/hibernate/log-off status,
display settings may change and will need to be set again.
How to set the Display Settings
 Click
button - "Control Panel. "
The "Control Panel" screen appears.
 Click "Adjust screen resolution" under "Appearance and
Personalization. "
The "Display Settings" screen appears for you to make all necessary
settings.
icon on the taskbar, to display the
11
GB