Sony PCWA-C300S Operating Instructions Manual page 32

7
8
9
10
If the computer you are using incorporates another Ethernet interface
besides the Wireless LAN PC Card, disable the other interface as follows.
1
2
3
4
5
32
Confirm that the message "This device is working properly."
is displayed under "Device status".
Note
If "This device is working properly." is not shown, the Wireless LAN PC Card is not
working correctly. Perform steps 1 - 5, click "Sony 802.11g Wireless LAN
Adapter", then click "Remove" to uninstall the driver. After uninstalling, restart the
computer and repeat the installation process.
Click "OK" to close the "Sony 802.11g Wireless LAN Adapter
Properties" dialog box.
The "System Properties" dialog box appears.
Click "OK" to close the "System Properties" dialog box.
Control Panel appears.
Click to close Control Panel.
Click "Start", point to "Settings", and click "Control Panel".
Control Panel appears.
Double-click the "System" icon.
Hint
If the "System" icon is not shown, select "View all Control Panel options".
Click the "Device Manager" tab and double-click "Network
adapters".
Double-click the network adapter to disable.
Click the "General" tab, then select the "Disable in this
hardware profile" check box.