DHW heating
DHW temperature
Required settings
If you require DHW heating, check the following points:
■
Have you selected the required set DHW tempera-
ture?
For settings, see page 34.
Setting the DHW temperature
Press the following keys:
1.
Repeatedly, until the standard menu is dis-
ä
played.
2.
/
For "DHW".
|
~
3.
To confirm.
d
Operating program
Setting the operating program for DHW heating
Heating program
DHW
Standby mode
Select with
Fig. 30
Press the following keys:
1.
Repeatedly, until the standard menu is dis-
ä
played.
Time program
Setting the time program for DHW heating
The times at which DHW heating is enabled for the rel-
evant heating circuit depend on the switching time set-
tings for the respective day (4 possible time phases).
■
The time program for DHW heating is made up of
time phases. A time phase from 06:00 to 22:00 h is
set at the factory for every day.
The factory setting for DHW heating is Automatic
■
mode.
34
Have you selected the correct operating program?
■
For settings, see page 34.
■
Have you selected the required time program?
For settings, see page 34.
4.
/
For "Set temperature".
|
~
5.
To confirm.
d
6.
/
For the required temperature.
|
~
7.
To confirm.
d
"Adopted" appears briefly on the display.
2.
/
For "DHW".
|
~
3.
To confirm.
d
4.
/
For "Operating program".
|
~
5.
To confirm.
d
6.
/
For "DHW" or "Standby mode".
|
~
7.
To confirm.
d
■
If you do not want automatic mode, you can select
up to 4 individual time phases per day for DHW heat-
ing. For each time phase you set the start and end
points.
■
In the "Extended menu", you can check the current
time program under "Information". See page 40.