Table of Contents
Advertisement
All manuals and user guides at all-guides.com
TIMER
5 Press CLOCK/TIMER again to store the
setting.
™ The clock starts.
• To exit without storing the setting, press
Ç on the system
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
Timer Setting
• The system can switch on to CD,
TUNER, or TAPE 2 mode automatically
at a preset time. It can serve as an
alarm to wake you up.
• Before setting the timer, make sure the
clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will
increase from the minimum level
until the volume level before the set
is switched to standby mode.
1 Press and hold CLOCK/TIMER for more
than 2 seconds to select timer mode.
™ " AM 12:00" or "00:00" or the
last timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode.
pg 01-26/P75/22-Eng
23
™ The
starts flashing.
– If the source selected is TAPE, and if the
TIMER
™ The selected source is lit while other
preset time is reached during high
available sources are flashing.
speed dubbing, the TUNER will be
2 Press CD, TUNER or TAPE to select the
selected instead.
– The timer will not activate if a recording
desired source.
is in progress.
• Before selecting CD or TAPE, make sure
a CD or tape is loaded in the CD tray or
tape deck 2.
To switch off the TIMER
3 Press à or á on the system to set
1 Press and hold CLOCK/TIMER for more
the hour for the timer to start.
than 2 seconds .
4 Press í or ë on the system to set the
2 Press Ç on the system to cancel the
minute for the timer to start.
timer.
5 Press CLOCK/TIMER to store the start
™ The timer is now switched off.
™ The display will show "OFF" and the
time.
™ The timer is now set.
™ The
remains on the display.
TIMER
• At the preset time, the timer will be
To start the TIMER again (for the same
activated.
preset time and source)
™ The selected source will be played.
1 Press and hold CLOCK/TIMER for more
than 2 seconds .
Notes:
2 Press CLOCK/TIMER again to store the
– During timer setting, if no button is
start time.
pressed within 90 seconds, the system
™ The timer is now on.
will exit timer setting mode
™ The
automatically.
– If the source selected is TUNER, the last
tuned frequency will be switched on.
– If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the CD trays
are empty, TUNER will be selected
instead.
SLEEP TIMER
Sleep Timer
This feature allows you to select a length
of time after which the system will switch
to the standby mode automatically.
1 Press SLEEP TIMER on the remote
control repeatedly to select a period of
time.
™ The selections are as follows (time in
minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™
60 ...
™ "SLEEP XX" or "OFF" will be
displayed. "XX" is the time in
disappears.
minutes.
TIMER
2 When you reach the desired length of
time, stop pressing the SLEEP TIMER
button.
™ After this amount of time passes, the
system will switch to the standby
mode.
To switch off the Sleep Timer
appears on the display.
• Press SLEEP TIMER repeatedly until
TIMER
"OFF" is displayed, or press the
STANDBY ON button.
3/6/00, 12:41 PM
(only on remote control)
23
3139 116 19761
Advertisement
Table of Contents
