Philips FW-P75 Manual page 9

All manuals and user guides at all-guides.com
When you have completed the Dolby Pro
Logic setup, you are ready to enjoy Home
Cinema sound.
• Press DPL (PRO
Ç
LOGIC) repeatedly
à á
to select and cycle
through the various
DPL
L R
BALANCE
sound modes.
Dolby Surround ™ Center
Phantom ™ Dolby 3 Stereo ™
Stereo ™ Dolby Surround ...
™ The Dolby Pro Logic display panel
will light up with the selection.
pg 01-26/P75/22-Eng 9
Dolby Surround Dolby 3 Stereo
This setting is for a full Dolby Surround Pro Use this setting when full surround is not
Logic mode. required, but a wide stereo sound is
desired. It only requires the left, right and
• Press DPL to select the Dolby Surround
center speakers.
mode.
™ The message • Press DPL to select the Dolby 3 Stereo
"DOLBY mode.
C
SURROUND" ™ The message
L R
will be
PRO LOGIC
S S
displayed.
™ The DPL display
panel will light ™ The DPL display
up.
Dolby Center Phantom
Normal Stereo
This setting is for use without the center
speaker. It redistributes the center speaker This setting is for normal stereo sound
sound to the left and right speakers, without Dolby Pro Logic. It only requires the
providing conventional stereo across the left and right speakers.
front.
• Press DPL to select the Stereo mode.
• Press DPL to select the Dolby Pro Logic ™ The message
Center Phantom mode.
™ The message
"CENTER
C
PHANTOM" ™ The DPL display
L R
will be
PRO LOGIC
S S
displayed.
™ The DPL display
panel will light
up.
Important!
1 For the best Dolby Pro Logic sound,
switch on DPL with DSC set to
"Classic".
2 Dolby Pro Logic mode will
automatically switch to normal
Stereo mode when headphones are
connected.
3 Switch to normal stereo mode when
"DOLBY 3 you record on a tape.
C
STEREO" will
L R
be displayed.
PRO LOGIC
S S
panel will light
up.
"STEREO"
C
will be
L R
displayed.
PRO LOGIC
S S
panel will light
up.
3/6/00, 12:40 PM
DOLBY PRO LOGIC
9
3139 116 19761