SImx Maxi Washer Installation Instructions

INSTALLATION INSTRUCTIONS
Model: Maxi Washer
Thank you for purchasing this SIMX Maxi Washer. This luminaire is suitable for outdoor use and
requires a 220V-240V AC power supply. Please read this manual thoroughly before installation and
retain for future reference.

TECHNICAL SPECIFICATIONS

Power supply
LED type
Operating temperature
Driver
Classifi cation
Ingress Protection
Construction
Model
LHT0980
LHT0981

IMPORTANT

This product is suitable for use only with a supply voltage of 220-240V AC 50/60Hz.
All electrical work must be carried out in accordance with local and national electrical
codes as applicable. We strongly recommend that this light fi tting is installed by a
registered electrician.
Always switch power off prior to installation. A means of mains power isolation must
be installed on the circuit for the purpose of safe access for any internal cleaning,
recalibration, or maintenance.
This light fi tting is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Young children should be supervised to ensure that
they do not play with the appliance.
Any changes or modifi cations made or attempted to this product, without the prior
written approval of the manufacturer, will void any and all stated warranties.
220-240 VAC
SMD3014 4200K
-10°C to + 40°C
350 mA Non-dimmable
Class II
IP55
ABS + Polycarbonate UV stabilised, stainless steel screws
Description
Square White
Square Dark Grey
Luminous Flux
500lm
500lm
Max Load
8 watt
8 watt