INSTALLATION INSTRUCTIONS
Model: Bulk LED
Thank you for purchasing this SIMX Bulk LED. This light is suitable for sheltered outdoor
permanent use and requires a 220/240VAC power supply. Please read this manual thoroughly
before installation and retain for future reference .
Model
LHT0240
LHT0241
LHT0242
LHT0243
TECHNICAL SPECIFICATIONS
Power source: 220-240 VAC
Power frequency: 50/60Hz
LED Type: SMD5050 3000K
Rated load: 6.5W max 0.08A
Luminous flux: 440lm
!
IMPORTANT
This product is suitable for use only with a supply voltage of 220-240V AC 50/60Hz.
All electrical work must be carried out in accordance with local and national electrical codes as
applicable. We strongly recommend that this light fitting is installed by a registered electrician.
Always switch power off prior to installation. A means of mains power isolation must be installed on the
circuit for the purpose of safe access for any internal cleaning, recalibration, or maintenance.
This light fitting is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety. Young children
should be supervised to ensure that they do not play with the appliance.
Any changes or modifications made or attempted to this product, without the prior written approval of
the manufacturer, will void any and all stated warranties.
Description
Bulkhead LED with Eyelid - Black
Bulkhead LED with Eyelid - White
Bulkhead LED Slim Trim - Black
Bulkhead LED Slim Trim - White
Installation height: 1.5m ~3m (wall installation)
Working temperature: -10° C ~ +40° C
Working humidity: <95% RH
Ingress Protection: IP44
Construction: Polycarbonate UV stabilised
Need help?
Do you have a question about the LHT0240 and is the answer not in the manual?
Questions and answers