Printer Paper - Cantel Medical MEDIVATORS CER OPTIMA User Manual

Remove and replace, or refill, the alcohol bottle.
Step 4:
Reinsert the uptake tube into the alcohol bottle, tighten the alcohol
Step 5:
bottle cap, and place the full alcohol bottle back into the alcohol
compartment.
Close the alcohol compartment door.
Step 6:

Printer Paper

Changing the Printer Paper
The CER OPTIMA
functions. Ensure the printer is loaded with a fresh roll of printer paper before operating the machine or
performing a cycle. The printer paper will show a small pink/red color line when the paper roll is nearing
empty. If the paper is empty or runs out during a print cycle, the cycle performed can be reprinted by selecting
the Print touchpad. The cycle data is available to print until either the "START" touchpad is pressed which
starts a new reprocessing cycle, or until the CER OPTIMA unit is shut off. The printer will automatically
detect when the thermal paper roll has run out, and indicate this condition with a flashing light on the printer
module.
58
endoscope reprocessing system uses thermal print paper to document all machine
®
Figure 17
Figure 16