Table of Contents
Advertisement
disassembling this projector.
Caution:
- While turning over a printed circuit board, be sure to put a
insulating material under it to prevent a short circuit.
- Printed circuit boards and wires must not be pulled forcibly, but be
handled carefully.
- Connectors also must be handled carefully.
- After repairing this projector, be sure to put back the wires and
connectors to the original condition.
5.1. Printed Circuit Board and Main Parts Location
Electrical Parts
Optical Parts
5.2. Removal of Upper Cover
1. Turn over (upside down) the main unit and unscrew the 5 screws
fixing the upper cover.
MC-Service
7
Advertisement
Table of Contents
