Table of Contents
Advertisement
6.2. Cautions for Adjustment
- Never turn off the MAIN POWER switch until every fan completely
stops.
- To maintain and ensure safety, always use the designated
components for replacement parts.
- If removing any clamps, lead wires or connectors, always place
them back in their proper locations.
- Be careful not to damage the lead wires or components when using
a soldering iron or similar tool.
6.3. Setting Before Adjustment
- Set up the projector to obtain the projection distance below.
- Turn the zoom knob of the lens block to obtain the largest size of
the picture.
6.4. Convergence Adjustment
6.4.1. Basic Adjustment Procedure
1. Use a hexagon head wrench, loosen the 2 screws just until the
bracket can be moved by your fingers.
17
Advertisement
Table of Contents
