Panasonic PT-L711E Service Manual page 11

1. Remove the upper cover according to the section 5.2. "Removal of
Upper Cover".
2. Remove the A-Module according to the section 5.3. "Removal of A-
Module".
3. Remove the Z3-P.C.Board according to the section 5.4. "Removal
of Z3-P.C.Board".
4. Unscrew the 2 screws fixing the intake fan unit.
5. Disconnect the connectors and remove the intake fan unit with the
air filter.
Note:
- When reassembling, must set the sensor to the original position.
6. Unscrew the 2 screws and remove the Z2-P.C.Board.
5.7. Removal of Power Unit
1. Remove the upper cover according to the section 5.2. "Removal of
Upper Cover".
2. Remove the A-Module according to the section 5.3. "Removal of A-
11