18
Use the two screws that came with the cage to fix this in server
7.
Keep the remaining screws for future use..
Notice
8.
Remove the two screws, and then remove the BBU cage.
9.
Secure the Cover Base Frame to the chassis with four nylon rivets provided with the disk cage.
Locate the Cover Base Frame from inside of the chassis, and secure it with the nylon rivets from
outside of the chassis.
Use the two screws removed in step 8 to fix the BBU cage in place.
10.
11.
Close the front mask.
12.
For details about how to install the RAID controller, see the server user's guide
or the RAID controller user's guide.
Notice