Operation
Demo Mode – Mistral (I200 and I270)
To access the demo mode press and hold for 5 seconds the Booster ("P") of the second
zone within 60 seconds the hob is plugged in and after the config code is shown:
I270
I200
Once the demo mode is active the letters "dE" ("d" on the left side and "e" on the richt side)
will appear and the mode is active.
Follow same procedure (after unplugged the hob) to deactivate the Demo
Mode
WHIRLPOOL CORPORATION ▪ CONFIDENTIAL ▪ EMEA CS&Quality Technical Training and Serviceability Team ▪ By Nicola Padula and Nicola Bargagnati