Samsung FH18BTA(X) Service Manual page 27

Disassembly and Reassembly
No Parts
1) Loosen the 4 screws in rear side of Front
5 Stepping Motor
2) Loosen the 2 screws as shown in picture.
3) Disassemble the Blade and Stepping
6 Display PCB 1) Loosen the 3 screws in rear side of
2) Disassemble Display PCB assembly
3) Disassemble the Display PCB.
4-9
All manuals and user guides at all-guides.com
Procedure
Cover assembly as shown in picture.
Motor assembly and remove the 2 Screws
Stepping Motor.
Front Cover assembly as shown in
picture.
and Disconnect Wire.
Remark
Samsung Electronics