Pairing And Connecting The Unit And A; Bluetooth Phone; When No Phones Have Been Paired - Genesis G70 Owner's Manual

Bluetooth® Wireless Technology
Pairing and connecting the
unit and a Bluetooth phone
To use the Bluetooth feature, make sure the
Bluetooth on your phone is turned on. Refer to
your phone's user guide.

When no phones have been paired

1. Press " " on the steering wheel remote
control.
2. Press [Yes] to search for Bluetooth phones.
• [No]: Cancels Bluetooth connection.
3. In your phone, initiate a search for Bluetooth
devices. (The default device name is GENESIS
G80.)
4. 1) If the SSP (Secure Simple Pairing) is not
supported, input the passkey on your
Bluetooth device. (The default passkey
is 0000.)
2) If the SSP (Secure Simple Pairing) is
supported, press [Yes] on the pop-up
screen of the your Bluetooth device.
(The pop-up screen may differ from the
actual information of the Bluetooth
device.)
5. Press [Yes] to connect automatically the
unit and a Bluetooth phone preferentially
after ignition switch is in ON position.
When you approve in the mobile phone,
the mobile phone contacts and the latest
call list are downloaded.
48
6. When your phone is successfully
connected, the phone screen is displayed
on the screen. When the connection fails,
failure message is displayed on the screen.
<Phone screen>
Once Bluetooth connection is successful,
the name of the connected mobile phone
will become displayed on the phone
screen and Bluetooth handsfree functions
will operate.