Viewing Usb Image; Switching To Menu Display Or Full; Display; Skip - Genesis G70 Owner's Manual

USB Operation

Viewing USB image

You can play image files saved in a USB
memory device.
Connect a USB device to the USB port and
playback starts automatically.
,
Note
If you want to play the USB image files when
playing other source with the USB device
connected, press [HOME] > [Media] > [USB Image].
Switching to Menu display or Full display
Position Description
Screen Press the screen.
,
Note
• If there is no operation for 5 seconds on menu
display mode, it switches to full display mode.
• If you press [MENU] > [Full display] on menu
display mode, it switches to full display mode.
• Image is not available while driving. (Based on the
traffic regulation, image is only available whenever
vehicle is in stop condition with parking gear.)

Skip

You can view the previous or next image.
For details, refer to the "Skip" on the page 36.

Zoom in/out

Turn the controller to the left or right.
For details, refer to the "Pinch in/out" on the
page 36.

Slideshow

You can set the slideshow.
For details, refer to the "Slideshow" on the
page 37.

List

You can view the desired image by searching
for image list included in USB.
For details, refer to the "List" on the page 37.

Slideshow Settings

You can set the slideshow interval. The
slideshow is played according to the time
interval.
For details, refer to the "Slideshow Settings" on
the page 37.
42

Copying the USB image file to

Jukebox

You can copy the desired files to Jukebox.
1. Press [MENU] > [Copy to Jukebox].
2. Select the desired file, then press [Copy].
• [Copy]: Copies the selected file.
• [Copy all]: Copies all the files.
• [Unmark all]: Unmarks all the files.
• [Cancel]: Cancels the copy function.

Display Settings

1. Press [MENU] > [Display Settings] on the
menu display mode.
2. For details, refer to the "Display" on the
page 57.