Warning Led Indications - Brother DCP-350C User Manual

Chapter 1
5 Stop/Exit
Stops an operation or exits from a menu.
6 On/Off
You can turn the machine on and off.
If you turn the machine off, it will still
periodically clean the print head to maintain
print quality.
7 Ink Management
Lets you clean the print head, check the print
quality, and check the available ink volume.
8 Mode keys
Scan
Lets you access Scan mode.
PhotoCapture
Lets you access PhotoCapture Center™
mode.
9 Warning LED
Turns red when the LCD displays an error or an
important status message.
Note
Most of the illustrations in this User's Guide
show the DCP-350C.
4

Warning LED indications

The Status LED (light emitting diode) is a light
that shows the status of the machine, as
shown in the table.
COPY
Quality
Enlarge/Reduce
Paper Type
20:48
Paper Size
Brightness
LED DCP status
Ready
Off
Cover open
Red
Ink empty
Paper error
Other
messages
01
Normal
100%
Plain
A4
0
Description
The DCP is ready for
use.
The cover is open. Close
the cover. (See Error
messages on page 36.)
Replace the Ink
cartridge with a new one.
(See Replacing the ink
cartridges on page 40.)
Put paper in the tray or
clear the paper jam.
Check the LCD
message. (See Error
messages on page 36.)
Check the LCD
message. (See Error
messages on page 36.)
1