Warning Led Indications; Lcd Display; Setting The Backlight Brightness - Brother DCP-J152W User Manual

Dcp-j152w
Hide thumbs Also See for DCP-J152W:
Table of Contents

Advertisement

Warning LED indications

The Warning LED (Light Emitting Diode) is a
light that shows the DCP status. The LCD
shows the current machine status when the
machine is idle.
LED
DCP
status
Ready
Off
Cover open The cover is open.
Orange
Cannot
print
Paper error
Other
messages
1
Description
The DCP is ready for
use.
Close the cover. (See
Error and maintenance
messages on page 40.)
Replace the ink
cartridge with a new
one. (See Replacing the
ink cartridges
on page 32.)
Put paper in the tray or
clear the paper jam.
Check the LCD
message. (See
Troubleshooting
on page 39.)
Check the LCD
message. (See Error
and maintenance
messages on page 40.)

LCD display

Setting the backlight
brightness
If you are having difficulty reading the LCD,
try changing the brightness setting.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose Backlight.
Press OK.
e
Press a or b to choose Light, Med or
Dark.
Press OK.
f
Press Stop/Exit.
General information
9
1
1
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents