Warning Led Indications; Lcd Display; Lcd Contrast - Brother DCP-T300 Basic User's Manual

Chapter 1

Warning LED indications

The Warning LED (Light Emitting Diode) is a
light that shows the DCP status. The LCD
shows the current machine status when the
machine is idle.
LED DCP
status
Ready
Off
Cover open The cover is open. Close
Orange
Cannot
print
Paper error Put paper in the tray or
Other
messages
8
Description
The machine is ready for
use.
the cover. (See Error
and maintenance
messages on page 41.)
Refill the ink tank.
When you refill the ink
tank, fill the ink up to the
upper line, or fill with all
of the ink in the bottle if it
does not exceed the
upper line.
(See Refilling the ink
tanks on page 33.)
clear the paper jam.
Check the LCD
message. (See If you are
having difficulty with your
machine on page 55.)
Check the LCD
message. (See Error
and maintenance
messages on page 41.)

LCD display

1

LCD Contrast

You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose
2.LCD Contrast.
Press OK.
d
Press a or b to choose Light or Dark.
Press OK.
e
Press Stop/Exit.
1
1