Connect Power; Prepare The Remote Control; Set Clock - Philips DCM5090 User Manual

All manuals and user guides at all-guides.com

Connect power

Caution
‡
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
‡
Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
‡
Before connecting the AC power cord, ensure
you have completed all other connections.
Connect the power cord to:
‡ the AC~MAINS jack on the back of the
main unit.
‡ the wall outlet.

Prepare the remote control

Caution
‡
Risk of explosion! Keep batteries away from
KHDW VXQVKLQH RU ÀUH 1HYHU GLVFDUG EDWWHULHV
LQ ÀUH
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
SRODULW\  DV LQGLFDWHG
3
Close the battery compartment.
a
b
c
Note
‡ If you are not going to use the remote control
for a long time, remove the batteries.
‡ Do not use old and new or different types of
batteries in combination.
‡
Batteries contain chemical substances, so they
should be disposed of properly.

Set clock

1
In standby mode, press and hold PROG/
&/2&. 6(7 for more than two seconds
to activate the clock setting mode.
» The 12 hour or 24 hour format is
displayed.
2
Press / to select 12 hour or 24
hour format, and then press PROG/
&/2&. 6(7.
» The hour digits are displayed and begin
to blink.
EN 11