Related Manuals for Philips SoundStage HTL4110B/93
Summary of Contents for Philips SoundStage HTL4110B/93
- Page 1 Always there to help you Register your product and get support at www.philips.com/support HTL4110B Question? Contact Philips User manual Philips Electronics Hong Kong Ltd.
-
Page 3: Table Of Contents
Contents 1 Important Safety Care for your product Care of the environment Help and support Trademarks 2 Your SoundStage Main unit Remote control Connectors 3 Place your SoundStage 4 Connect and set up Connect to TV Connect audio from TV and other devices 7 5 Use your SoundStage Adjust the volume Choose your sound... -
Page 4: Important
1 Important • If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before Read and understand all instructions before you connecting it to the power outlet. use your product. If damage is caused by failure to •... -
Page 5: Care For Your Product
Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. Please visit www.recycle.philips.com for additional information on a recycling center in your area. -
Page 6: Your Soundstage
Remote control SoundStage This section includes an overview of the remote control. Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers(e.g. notification of product software upgrade), register your product at www.philips.com/welcome. Main unit This section includes an overview of the main unit. -
Page 7: Connectors
c AUX/AUDIO IN Connectors Press repeatedly to switch your audio source to the AUX connection or MP3 This section includes an overview of the connection (3.5mm jack). connectors available on your SoundStage . Skip to the previous or next track in USB Side connectors mode and Bluetooth mode (only for AVRCP-supported Bluetooth devices). -
Page 8: Place Your Soundstage
3 Place your Make sure the TV base is centered on it and not hanging over any of its edges. SoundStage This SoundStage is designed to be placed under your TV. Caution • The SoundStage is designed for TVs that weigh no more than 24 kg. -
Page 9: Connect And Set Up
4 Connect and set Using a High Speed HDMI cable, connect the HDMI OUT (ARC) connector on your SoundStage to the HDMI ARC connector on the TV. • The HDMI ARC connector on the TV might be labeled differently. For details, This section helps you connect your see the TV user manual. -
Page 10: Use Your Soundstage
5 Use your Using an optical cable, connect the OPTICAL IN connector on your SoundStage SoundStage to the OPTICAL OUT connector on the TV or other device. • The digital optical connector might be labeled SPDIF or SPDIF OUT. This section helps you use the SoundStage to play media from a wide range of sources. -
Page 11: Mp3 Player
On the Bluetooth device, switch Night mode on Bluetooth, search for and select PhilipsHTL4110B to start connection (see For quiet listening, decrease the volume of loud the user manual of the Bluetooth device sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. -
Page 12: Usb Storage Devices
• The operational range between the main Note unit (left and right speakers) and a NFC device is approximately 10 meters (30 • This product may not be compatible with certain types of USB storage device. feet). • If you use a USB extension cable, USB HUB, or USB Enable NFC on your Bluetooth device (see multi-reader, the USB storage device may not be the user manual of your device for details). -
Page 13: Product Specifications
6 Product Bluetooth specifications • Bluetooth profiles: A2DP, AVRCP • Bluetooth version: 3.0 + EDR Main unit Note • Power supply: 110-240 V~, 50/60 Hz • Specifications and design are subject to change without • Power consumption: 20 W notice. • Standby power consumption: ≤ 0.5 W • Speaker impedance: 4 ohm •... -
Page 14: Troubleshooting
• The SoundStage is already connected with If you still have a problem, get support at another Bluetooth device. Disconnect the www.philips.com/support. connected device, then try again. Quality of audio play from a connected Main unit Bluetooth device is poor. - Page 15 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The Bluetooth word mark and logos are ® registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by WOOX Innovations is under license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI...
- Page 16 产品中有害物质的名称及含量 Names and Contents of Hazardous Substances 有害物质 Hazardous Substance 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 Name of the parts (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) Housing 外壳 Loudspeakers 喇叭单元 PWBs 电路板组件 Accessories (Remote control & cables) 附件（遥控器， 电源线，连接线）...
- Page 18 Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V.