Canon Laser Shot LBP5200 User Manual page 276

Do not hold or touch the electrical contacts. Doing so may damage the drum cartridge.
•
Electrical Contacts
Do not hold or touch the transfer belt. Doing so will degrade the printing quality. Do not
•
jolt the drum cartridge memory or bring it near a magnetic field. Doing so may damage
the drum cartridge.
Drum Cartridge Memory
Transfer Belt
When handling the drum cartridge, hold it properly as shown in the figure. Do not stand it
•
on its end, or turn it upside down.
Do not attempt to disassemble or modify the drum cartridge.
•
If you expose the drum cartridge to rapid changes in temperature, droplets of water
•
(condensation) may form on the interior and exterior of the cartridge. If a new drum
cartridge that has been stored in a cool location is going to be installed in a warm area,
leave the cartridge for two or more hours without opening the protective bag to allow the
cartridge to adjust to the surrounding temperature before opening the bag.
Be sure to use a new cartridge within the expiration date indicated on the package.
•
Electrical
Contacts
Replacing the Drum Cartridge
5
5-29