Problems Sharing The Printer - Canon Laser Shot LBP5200 User Manual

Canon laser beam printer user's guide
Hide thumbs Also See for Laser Shot LBP5200:
Table of Contents

Advertisement

Cause 3
Remedy
Cause 4
Remedy
[Local printer attached to this computer]* cannot be selected in the [Add Printer Wizard]
dialog box (Windows 2000/XP/Server 2003).
Cause
Remedy

Problems sharing the printer

7
The print server to connect to cannot be found.
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
7-48
Installation Problems
The USB cable is not connected properly.
Make sure that the printer and computer are connected with the USB cable
properly.
An unsuitable USB cable is being used.
Use a USB cable that matches the USB interface on the printer. The USB
interface on this printer is USB 2.0 High-Speed (Windows 2000/XP/Server 2003
only), USB Full-Speed (USB 1.1 equivalent).
Installation was performed by a user who is not a member of the Administrators
group.
CAPT (Canon Advanced Printing Technology) software needs to be installed by
a member of the Administrators group. Have a user with the correct permissions
install the software.
* On Windows 2000, this becomes [Local Printer].
The print server has not been started up.
Start up the print server.
The printer is not configured as a shared printer.
Update the printer as a shared printer in the [Printer Properties] dialog box.
The user does not have permission to access the print server or printer.
Ask your network administrator to change the user permissions.

Advertisement

Table of Contents
loading

Table of Contents