Canon Laser Shot LBP5200 User Manual page 21

When you are moving the printer, always turn the printer off, unplug the power plug,
•
and remove the interface cable. If you move the printer without unplugging the
cables, the electrical cord and interface cable may be damaged, causing a fire or
electrical shock.
Do not drop paper clips, staples, or any other metallic objects into the printer. Do not
•
spill water, liquids, or flammable substances (alcohol, benzene, thinners, etc.) onto
the printer. If any of these items come into contact with the electrical unit inside the
printer they may ignite or cause an electrical shock. If any of these objects fall into
the printer, turn the printer off immediately, and disconnect the USB cable if it is
connected. After this, pull out the power plug, and contact the store where you
purchased this printer.
If you are connecting or disconnecting the USB cable while the printer power plug is
•
connected to a power outlet, make sure that you do not touch the metal parts of the
connector. Doing so may cause an electrical shock.
CAUTION
Do not put any heavy objects on top of this product. If a heavy object topples over or
•
falls it can cause personal injuries.
Take care when you are handling expansion boards. Do not touch the corners or
•
sharp areas of an expansion board as this may cause personal injury.
If you will not use the printer for a long period of time, such as at night time, turn the
•
printer off for safety reasons. Furthermore, if you will not use the printer for a longer
period of time, such as a weekend, turn the printer off and unplug the power plug for
safety.
Laser light can be harmful to the human body. In products that are designed for laser
•
light, the laser scanning unit is sealed behind a cover, and there is virtually no risk of
being exposed to the laser light if the product is operated normally. Be sure to
observe the following safety precautions.
- Never open any of the covers unless directed to by this manual.
- Do not remove the caution label attached to the cover of the laser scanner unit.
- If the laser beam escapes from the printer, exposure may cause serious damage to
your eyes.
- The LBP5200 has been verified as a Class 1 laser product in compliance with
IEC60825-1:1993.
xviii