Fora 6 Plus Owner's Manual page 22

To review the day-average test results, do the following:
1. Press and release
" and
measured in general mode will appear on the display.
2. Press or
each measuring mode in the order of Gen, AC, then PC.
Note:
• Press and hold MAIN for 5 seconds to exit the memory mode or leave it without
any action for 3 minutes. The device will turn off automatically.
• If using the device for the first time, the "---" icon will appear when you recall
the test results or review the average result. This indicates that there is no test
result in the memory.
• Control solution results are NOT included in the day average.
22
to enter memory mode for average results with "
displayed on the screen. And then your 7-day average result
to review 14, 21, 28, 60 and 90-day average results stored in