Main Functions
NOTE
Notes on WEEKLY TIMER operation
•
• The day of the week, ON/OFF TIMER mode, time and set temperature (only for ON TIMER mode) can be set with the WEEKLY TIMER.
• WEEKLY TIMER and ON/OFF TIMER operation cannot be used at the same time. The ON/OFF TIMER operation has priority if it is set while
WEEKLY TIMER is still active. The WEEKLY TIMER will enter the standby state, and "
OFF TIMER is up, the WEEKLY TIMER will automatically become active.
• Turning off the circuit breaker, power failure, and other similar events will render operation of the indoor unit's internal clock inaccurate. Reset the clock.
•
can be used only for the time and temperature settings. It cannot be used to go back to the reservation number.
46
6.
Press
to select the desired time.
• The time can be set between 0:00 and 23:50 in 10-minute intervals.
• To return to the ON/OFF TIMER mode setting, press
9
• Proceed to STEP
7.
Press
• The time will be set.
• "
" and the temperature blink.
8.
Press
to select the desired temperature.
• The temperature can be set between 50°F (10.0°C) and 90°F (32.0°C).
COOL or AUTO: The unit operates at 64°F (18.0°C) even if it is set at 50°F (10.0°C) to
63°F (17.0°C).
HEAT or AUTO : The unit operates at 86°F (30.0°C) even if it is set at 87°F (31.0°C) to
90°F (32.0°C).
• To return to the time setting, press
• The set temperature is only displayed when the mode setting is on.
9.
Press
• Check for a receiving tone and that the OPERATION lamp blinks twice.
• The TIMER lamp lights orange.
• Temperature and time are set in the case of ON TIMER operation, and the time is set in
the case of OFF TIMER operation.
• The next reservation screen will appear.
• To continue further settings, repeat the procedure from STEP
Display
10.
Press
to complete the setting.
• "
" is displayed on the LCD and WEEKLY TIMER operation is activated.
• A reservation made once can be easily copied and the same settings used for another
day of the week. Refer to Copy mode .
when setting the OFF TIMER.
.
.
.
" will disappear from the LCD. When the ON/
SiUS042113E
.
4
.
Part 4 Functions and Control