Si002154E
Step
4
Remove the nut, and
then the outdoor fan.
5
Open the 2 hooks and
release the fan motor
lead wire.
6
Remove the 4 screws,
and then the fan motor.
Removal Procedure
Procedure
D-cut
Nut
Outdoor fan
Hook
Hook
Fan motor
Outdoor Fan / Fan Motor
Points
Nut size: M6
When reassembling, align
the
mark of the fan rotor
with the D-cut section of the
motor shaft.
(R26010)
When reassembling, make
sure that the 2 hooks are
securely fastened.
(R26011)
When reassembling, put the
fan motor lead wire through
the back of the fan motor to
avoid any entanglement with
the outdoor fan.
Lead wire
(R26012)
10 mm
(0.39 inch)
(R18954)
Outdoor fan
(R3249)
5