Advertisement
Compressor
Step
2
Remove the putties as
necessary.
3
Press down on the
central protrusion (A) to
unfasten the 2 hooks,
and then remove the
overload protector.
4
Heat up the brazed part
of the discharge side
pipe and disconnect it.
5
Heat up the brazed part
of the suction side pipe
and disconnect it.
6
Remove the 3 nuts of
the compressor.
7
Lift up the compressor
and remove it.
22
Procedure
A
Hook
Brazed part of the
discharge side pipe
Compressor
(R26133)
When reassembling, make
sure that the 2 hooks are
securely fastened.
When replacing the
compressor, make sure to
replace the radiation sheet
on the back of the overload
protector.
Radiation sheet
(R26052)
Brazed part of the
suction side pipe
Nut
(R26136)
Si002154E
Points
(R26053)
Removal Procedure
Advertisement
