Advertisement
Si002154E
Step
3
Release the overload
protector harness from
the sound insulation
(inner sleeve) slit.
4
Remove the sound
insulation (inner
sleeve).
5
Remove the sound
insulation (bottom).
Removal Procedure
Procedure
Slit
Sound insulation
Overload
(inner sleeve)
protector harness
Sound insulation
(bottom)
Partition Plate / Sound Insulations
Points
When reassembling, pass
the overload protector
harness through the 2 slits
Slit
(R26047)
When reassembling, make
sure that the felt side is
faced upward.
(R26049)
(R26048)
17
Advertisement
