Product Specifications - Gardeo GCBE18VCR-LI Manual

It is essential that you read the instructions in this manual before mounting and operating
CONSIGNES DE SÉCURITÉ
The tools should be operated with
the ONE+ battery pack.
When using battery operated tools
basic safety precaution should
always be followed to reduce
the risk of fire, leaking batteries and
personal injury, including the
Read the operation manual and
follow all warnings and safety
Wear eye protection and ear
Do not use this machine in wet
weather conditions!
Wear protective clothing and boots.
Keep all bystanders at least 15 m
Maintenez les visiteurs à une
！
distance d'au moins 15 m de la

PRODUCT SPECIFICATIONS

Motor
No load speed
Battery Pack
Charging Rate
String Head
Cutting Line Diameter
Cutting Path Diameter
Weight with Battery pack
Important!
this machine.
Subject to technical modifications
WARNING
following.
instructions.
protection.
away.
zone de travail.
18 V DC
10000 min-1
18 V
1 h
Auto
1.65 mm
250 mm
2.5 kg
GB
FEATURES
Fig.1
1 TRIGGER LOCK BUTTON
2 FRONT HANDLE
3 SHAFT ADJUSTMENT COLLAR
4 MOTOR HOUSING
5 BATTERY PACK
6 REAR HANDLE
7 TRIGGER
8 GRASSSHIELD
9 CUTTING LINE
Fig. 2
10 GRASS SHIELD
11 MOTOR HOUSING
12 REMOVE BOTH SCREWS
13 RE-INSTALL BOTH SCREWS
Fig.3
14 FRONT HANDLE
15 FASTEN KNOB
16 BOLT
Fig.4
17 TO UNLOCK COLLAR
18 SHAFT ADJUSTMENT COLLAR
19 LOWER PORTION OF SHAFT
ADJUSTMENT
20 SLIDE OUT TO DESIRED POSITION
Fig. 5
21 BATTERY PACK
22 LATCHES
Fig. 6
23 TRIGGER LOCK BUTTON
24 TRIGGER
Fig. 7
Spool Maintenance
Fig. 8
25 BATTERY CHARGER
26 GREEN LIGHT
27 RED LIGHT
ASSEMBLY
INSTALLING GRASS SHIELD
Remove both screws on the motor housing.
Orient grass shield on the motor housing and twist
to lock in place as shown.
17