Connecting Client Devices - NetComm CloudMesh Satellite NS-02 User Manual

When connected to the CloudMesh Gateway, the LED shows the signal strength as follows:
L E D
The LED may also display the following statuses.
L E D

Connecting client devices

You can connect any number of Wi-Fi enabled client devices to the internet via the CloudMesh Satellite using
the WPS (Wi-Fi Protected Setup™) functionality of each device.
CloudMesh Satellite – User Guide
UG01350 v1.00 14 July 2021
L E D a c t i v i t y
Solid white Good signal
Solid blue Medium signal
Solid red Poor signal
Blinking No signal / too far from gateway / not connected to mesh
blue network
Blinking
WPS pairing activated
purple
Fi gure 5 - LED signal strength statuses
L E D a c t i v i t y
Solid pink
Blinking purple
Blinking pink
Solid green
Fi gure 6 - Additional LED statuses
M e a n i n g
M e a n i n g
Paired but no Internet connection
WPS pairing activated
Pairing in progress
Wired connection to the gateway.
11 of 22